steel chastity device

All posts tagged steel chastity device

I recently surprised cagedmonkey with a new Mature Metal Jail Bird. I called up and talked to Mistress MM and ordered a different version of the custom device we already have, with a few changes in size as well. I told her all about the surprise I had in mind for cagedmonkey she was extremely helpful in getting the device ordered without him knowing I’d even ordered it.

Way back in 2013 when we ordered our first Jail Bird, we’d ordered the device very similar to the Bird Cage we had been using. We ordered a 2 inch round base ring and a 4 inch long cage that was 1 1/2 inch in diameter. While those measurements worked just fine, after about a month or so we knew exactly what measurements needed some tweaking. That’s when we sent back the device to Mature Metal and William made some adjustments.


Original Jail Bird BR: 1 7/8" ID: 1 1/2" Length: 3"

When we received the cage back it was all shiny and resized. It now had a 1 & 7/8 inch oval base ring and a 3 inch long cage with the same 1 1/2 inch diameter. That cage has fit perfectly for the past year and a half or so that cagedmonkey has been locked in it. There really is no need for a new cage other than I wanted to try a slightly new look.

When I ordered this new Jail Bird I really liked the idea of adding a ring to the actual cage part as well as making the whole device just a bit more snug. The added ring seems to make CM’s bits slightly less accessible as well as add a neat look to the cage. It still allows for wonderful hygiene though because it’s still a very open style cage. I also ordered him a double base ring with the hopes that it might help add some surface area and hold the cage a little more snug to cagedmonkey’s body.


New Jail Bird DBR: 1 7/8" ID: 1 3/8" Length: 2 3/4"

The new cage’s measurements are slightly smaller and tighter than our original but the double base ring is the same 1 7/8″ oval. The cage length is 2 3/4″ and the inside diameter is 1 3/8″. That extra ring on the cage really makes it look like a large difference in size but it’s really not.
I really do like the look of the new cage when cagedmonkey wears it but alas the new sizing wasn’t exactly a good thing. The new length was probably not an issue at all but the diameter was just a bit too small and cagedmonkey was getting pinched because his skin was sticking out between the bars just enough. There is such a thing as a cage being a little too snug around the shaft. I hear people say all the time how “you really can’t go too short” and I’m not sure I believe that because you really do need a properly fitting device in length and diameter.
While over all I do love the look of this cage, I want cagedmonkey to be comfortable in the cage he wears for me, or at least most of the time anyway. Granted, the cage can get a bit uncomfortable at times when I make it that way but in everyday wear I want it to be something he can wear all day everyday. It shouldn’t be pinching him or difficult to maneuver or need too much adjusting to use the bathroom. That is something I’ll let cagedmonkey tell you about here.

So what it comes down to is this; we will be selling this new Jail Bird and I will reorder another one exactly the same with the 1 1/2″ inside diameter. If you or anyone you know are looking for a nice Mature Metal device life this and you don’t want to wait on build time, please contact us!

We got our Revenge, from Steelworxx in Germany, about a week or so ago. Cagedmonkey has tried it on a few times but he hadn’t worn it for any significant amount of time, until recently. We like to go a little slow with things to make sure nothing is pinching, poking, or scratching anywhere. Now like I said, we’ve only had it about a week so some of these feelings may change but the overall review should be the same.

When I first opened the package I was greeted by a black velvet cinched bag with the Steelworxx logo. Very elegant, in my opinion! My first impression of the device was that it looked so sleek. The Revenge is an almost fully enclosed chastity device. It looked exactly as the picture showed on the website. Polished and pretty and ready to be broken in.
We were fully thinking that it would be a pain to get on and that we might need to use the “Stocking Method” to get him in it. After trying to put it on both with and without the Stocking we’ve found that, for hubby, it really doesn’t matter which method. Everything ends up pretty much in the places it goes, naturally.

So I figured I would post some of the specs that we ordered for this device –
Base Ring: 2″ (50mm)
Tube Diameter: 1 1/2″ (38mm)
Tube length: 3″ (80mm)

What we’ve found so far is that we should have ordered a couple different sized rings at the time of the order. Cagedmonkey definitely needs a smaller ring size (1 7/8″ or 47mm) and as it is now, we will have to send the device back to Steelworxx overseas so a smaller ring can be made to fit our device. I’m not too happy about that but we’ve decided to wait a bit before doing that. The device fits with the ring we have but it would be more comfortable and tighter to his body with a smaller one. We hope to check out the device a bit more to see if there are any other modifications that need to be done before sending it out to Germany.

I know you’re wondering how it feels to actually wear the device. So I’ve gotten cagedmonkey’s opinion, so far, on how the device feels to get on and wear.

– Obviously with the more enclosed design it is slightly more difficult to insert into tube.
– The device is comfortable, but in a different way than the open style devices. With the enclosed tube there are no sensitive areas bulging out of the bars. This also eliminates the pinching and/or scratching from the lock on the shaft.
– When experiencing an attempted erection there is also a different feeling as compared to the open design. There is this sense of compression of the tube on my shaft (instead of my shaft pressing against the bars of the open style.)
– Urination is not as bad as expected, some “spray-age” if one of the bars at the end of the tube is in the way. With some careful aiming there are no problems (while sitting of course).
– Haven’t had a chance to experience a good amount of time not seeing or touching so the psychological difference hasn’t happened yet.
– A huge difference is that there is NO feeling from the outside of the tube – even when ML takes the cage inside her, I can’t feel a thing.

I can just imagine how frustrating that must be… to not feel anything. One thing I do want to attempt, at some point, is going an extended amount of time (probably a week to start and maybe get longer… a month?) where cagedmonkey does not touch or see his cock the entire time. Where, if he needs out, he would be cuffed and blindfolded. It would be interesting to see how he handles it psychologically, when I practically take away his penis. 🙂

Anyway, that’s our review at this point. I’m sure if that changes you’ll hear about it.